DPA 4071

4071 Omnidirectional, Low-cut, Presence Boost
When recording voices from mic placement on a performer’s body, no frequency below 100 Hz is attractive.
For this reason, an acoustical low-cut has been incorporated in the 4071 capsule so the built-in pre amp
(and the wireless system) will have much larger headroom. Furthermore, it removes distant rumbling from cars,
trains, airplanes, etc.

Another and equally important consideration is that when placing a microphone on the body,
espcially on the chest, the frequency range of the consonants is damped, resulting in poor intelligibility.
The 4071 has a built-in boost to compensate for this loss. Especially for ENG work the 4071 is perfect
because almost no ENG mixer leaves any possibility for a compensation of this kind.

The 4071 lapel mic is available in three colors: black, beige and white.

For a wireless microphone, choose between our adapter system or a hardwired connector.

Typical applications are ENG/EFP use on the reporter in studio or in the field, or film production use,
with hidden microphone placements on the actors.

A wide range of accessories is available, such as windscreens in different colors, clips and holders,
extension cables, and power supplies.

 Wireless microphones
A wide range of connection adapters makes it possible to use DPA miniature microphones
with all professional UHF, VHF or digital wireless system available plus 48 V Phantom.

DPA has specific adapters for Wisycom, AKG, Audio Ltd., Audio-Technica, Beyerdynamic, Electro-Voice,
Lectrosonics, Line 6, Micron, Mipro, Telex ProStar, Ramsa, Samson, Sennheiser, Shure, Sony, Toa,
Vega and other systems. Each adapter for your cordless microphone is guaranteed to perfectly
mate to your system of choice.

The 4071 features a specially designed, fixed microphone grid with a soft presence boost of typically
5 dB at 4 to 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within
the area that the 4071 grid boosts

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser element with vertical diaphragm
Frequency range, ± 2 dB: 100 Hz – 15 kHz with typ. 5 dB soft boost at 4 – 6 kHz
Sensitivity, nominal, ±3 dB: 6 mV/Pa ved 1 kHz; -44.4 dB re. 1 V/Pa
Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB (A)
Total harmonic distortion (THD): < 1 % THD up to 123 dB SPL peak; < 1 % up to 120 dB SPL RMS sine
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: 30 – 40 ohm
Cable drive capability: Up to 300 m (984 ft)
Power supply: For wireless systems: Min. 5 V – max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance.
Connector: MicroDot
Color: Black, beige or white
Microphone weight: 9 g (0.32 oz) incl. cable and MicroDot connector
Microphone diameter: 5.4 mm (0.2 in)
Microphone length: 17 mm (0.67 in)
Cable length: 1.8 m (5.9 ft)
Cable diameter: 1.6 mm (0.06 in)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Operating temperature range: -10 to 45°C (14 to 113°F)