+45 32 97 29 00
mail@pss.dk

Vanguard VSSM Small Shockmount

Vanguard ønskede også at slippe af med irriterende oplevelser fra spinkle elastikker der leveres som standard med de fleste mikrofonophæng. Disse bliver strakt ud, bliver slappe og knækker nogle gange uden varsel – ikke noget, du ønsker sker, når din mikrofon er isat ophænget. I stedet er her installeret gummierede ophængningsringe, i materiale som bliver brugt i luftfartsindustrien, som ikke slappes, svækkes, eller revner over tid. Der er brugt et præcist durometer til ophængsringene, der vil støtte selv de tungeste mikrofoner, samtidig med at der stadig opretholdes fremragende separation for at forhindre uønskede vibrationer.
Ringene kan krydses enten vandret / lodret eller diagonalt for at give et mere sikkert greb til forskellige mikrofonstørrelser.

Kraftig zinklegering til VSSM krop og drejeled. Der er ingen lodninger eller svejsninger, der kan svækkes over tid. I stedet er hver komponent præcisionsstøbt.
Fæsteskruen er i slagfast ABS termoplastisk polymer for at give overlegen friktion. Dette forhindrer, at mikrofonen langsomt glider ud af position.

Udvendig diameter: 49,5 mm
Indvendig diameter: 37,5 mm
Længde: 58mm

VSSM leveres som et standard tilbehør til Vanguard V1 Multi-Capsule blyantkondensatorsæt. Det er et shockmount der kan bruges til en lang række kondensator-, bånd-, shotgun- og dynamiske mikrofoner fra flere mærker, med en diameter på op til 30 mm. Se listen nedenfor for at se kompatible mikrofonmodeller:
Advanced Audio – CM1084
AKG – C451, C460, C391B, P170
AMT – AMT404
Audio-Technica – AT2021, AT4041, AT4021, AT4022, AT4051, AT4053B, AT8015, AT8035, AT875R, AT897, ATM450, Pro 37,
Audix – f9, f15, ADX51, TM1
Avantone – CK-1
Behringer – B-5, C-2, C-4, ECM8000
Beyerdynamic – TG I53, MCE 72,
Blue – Hummingbird,
CAD – C9, GXL1200BP, ICM417
DPA – 4011A, 4006A, 4091
Earthworks – DP30-C, P30C-B, P30C-W, SR20/25/30/30HC/40/40HC, TC20/25/30QTC30/40/50
Electro-Voice – PL37
GoldenAge – FC4
Lauten – LA120
Miktek – C5
Mojave – MA100, MA101
MXL – 991, 993, 603S
Nady – CM88
Neumann – KM84/85/86, KM183/184/185,
Oktava – MK012, MC012,
Peluso – P84, CEMC 6
Røde – NT4, NT5, NT55, M5, NTG1/2/3
Royer – R-121, R-121 LIVE, R-122 MKII, R-122 MKII LIVE, R-122V, SF12
Samson – CO2
Schoeps – CMC641, Collette, CMC6
sE Electronics – sE5, RN17
Sennheiser – e614, e914, MKH 40, MKH 50, MKH 800, MKH 8040 (w/ XLR Module only)
Shure – Beta 181, SM81, SM94, SM137, KSM37
Sterling – S30,
Studio Projects – C4
Telefunken USA – M60/61/62, ELA M 260

-og mange flere. Hvis din mikrofon har en diameter mindre end 30 mm og en længde større end 65 mm, vil den sandsynligvis være kompatibel med dette shockmount.

Vanguard VLSM Large Shockmount

Zink- og aluminiumlegeringer bruges til konstruktionen af VLSM. Der er ingen lodninger eller svejsninger, der kan svækkes over tid. I stedet er hver komponent præcisionsstøbt og bearbejdet.
Vanguard valgte at lave monteringsskruen i slagfast ABS termoplastisk polymer for at give overlegen friktion til mikrofonmonteringen. Dette forhindrer, at mikrofonen langsomt glider ud af position.
Konstruktion i tung messing og zinkmetal
Aircraft kvalitet ophængningsringe
Open-Face design
M22 gevind for bred kompatibilitet med mikrofoner fra andre mærker
Udvendig diameter: 117 mm
Indvendig diameter: 70 mm
Højde: 109 mm
Open-Face spredning: 120 °
Rillet låse gevind: M22x1

Vanguard V34C “LOLLI” Capsule

Tilpasset kant-ophængt 34 mm dobbeltkapsel med 3 um guld-platterede Mylar membraner
2 karakteristikker, Cardioid og Omni (kan vælges øverst)
PTFE-isoleret kredsløb
Chassis i CNC-bearbejdet massiv aircraft aluminium
Specialtilpasset kapselophæng
Åben vævet grillnet for lave indre refleksioner og “open air” feeling.
6 ventilationsåbninger i radius for at forhindre indre refleksioner

Udvendig diameter: 117 mm
Indvendig diameter: 70 mm
Højde: 109 mm
120 °
Rillet låsegevind: M22x1
5-års garanti

Vanguard V1S Stereo Kit + Stereo Bar

4 par (8 stk) 22mm småmembrankapsler – cardioid, hypercardioid, omnidirectional, wide cardioid
Transformer-balanceret solid-state kredsløb –
Transformer-balanceret output – tilpasset med håndviklet humbucking dual-spoletransformator
Bruger 48V phantom

Transducer Type: Condenser
Capsule Size (Small-Diaphragm): 22mm
Diaphragm Size (Small-Diaphragm):16mm
Capsule Diaphragm Thickness (Small-Diaphragm): 4µm
Electronics Type: Solid-state, transformer-balanced output
Output Impedance: 200O
Max SPL: >=136dB (0.5% THD @ 1000Hz)
Frequency Response: 20Hz-20kHz
Equivalent Noise Level: <15dbA
Output Connector: Male XLR 3-pin, gold-plated
Finish: Polished nickel trim / High-gloss Pinot Noir
Voltage Requirement: Phantom Power (+48V ideal)

Vanguard V1 Pencil Condenser

4 små-membran 22mm kapsler – cardioid, hypercardioid, omnidirectional, wide cardioid
Transformer-balanced solid-state circuit
Ultra low-noise high-quality hand-biased JFET
Transformer-balanced output – custom-wound humbucking dual-bobbin transformer
Bruger 48V phantom power

Heavy-duty brass, aircraft-grade aluminum, steel, and zinc construction
Deep-gloss Pinot Noir finish
Polished nickel trim
5-Year Warranty

Transducer Type: Condenser
Capsule Size (Small-Diaphragm): 22mm
Diaphragm Size (Small-Diaphragm): 16mm
Capsule Diaphragm Thickness (Small-Diaphragm): 4µm
Electronics Type: Solid-state, transformer-balanced output
Output Impedance: 200 Ohm
Max SPL: 136dBA (0.5% THD @ 1000Hz)
Frequency Response: 20Hz-20kHz
Equivalent Noise Level: <15dBA
Output Connector: Male XLR 3-pin, gold-plated
Weight (microphone): 119g (microphone only); 130g (with small capsule)
Weight (in case): 1.21kg
Dimensions (microphone): 133mm long, 22mm diameter
Dimensions (case): 293mm L x 190mm W x 95mm H

Vanguard V1S + LOLLI Stereo Kit

Otte små-membran 22mm kapsler – cardioid, hypercardioid, omnidirectional, wide cardioid (par)
To stor-membran V34C “Lolli” multi-pattern kapsler – omskiftbar cardioid & omni
Transformer-balanceret solid-state kredsløb med premium-grade over-spec circuitry
Low-noise ultra-grade hand-biased JFET
Transformer-balanceret output – custom-wound humbucking dual-bobbin transformer
Bruger 48V phantom power

Heavy-duty brass, steel, and zinc construction
Each V1 microphone comes with its own laser-engraved serial number
Deep-gloss Pinot Noir finish
Polished nickel trim
5-Year Warranty

Transducer Type: Condenser
Capsule Size (V34C) :1.34″ / 34mm (dual-capsule)
Diaphragm Size (V34C): 1.04″ / 26.4mm
Capsule Diaphragms Thickness (V34C): 3µm
Capsule Size (Small-Diaphragm): 0.87″/22mm
Diaphragm Size (Small-Diaphragm): 0.78″ / 16mm
Capsule Diaphragm Thickness (Small-Diaphragm): 4µm
Electronics Type: Solid-state, transformer-balanced output
Output Impedance: 200 Ohm
Max SPL: 136dBA (0.5% THD @ 1000Hz)
Frequency Response: 20Hz-20kHz
Equivalent Noise Level: <15dBA
Finish: Polished nickel trim / High-gloss Pinot Noir

Vanguard V1 + LOLLI

4 small-diaphragm 22mm capsule assemblies – cardioid, hypercardioid, omnidirectional, wide cardioid
Large-diaphragm V34C “Lolli” multi-pattern capsule assembly
Transformer-balanced solid-state circuit
Ultra low-noise high-quality hand-biased JFET and other premium-grade components
Deep-cycle cryogenic treatment of critical signal & power path components
Transformer-balanced output -custom-wound humbucking dual-bobbin transformer
Works via 48V phantom power

Heavy-duty brass, aircraft-grade aluminum, steel, and zinc construction
Each V1 comes with its own laser-engraved serial number
Over-spec componentry
Deep-gloss Pinot Noir finish
Polished nickel trim
Precision-cast Vanguard badge
5-Year Warranty

Transducer Type: Condenser
Capsule Size (V34C) : 34mm (dual-capsule)
Diaphragm Size (V34C): 26.4mm
Capsule Diaphragms Thickness (v34C): 3µm
Capsule Size (Small-Diaphragm): 22mm
Diaphragm Size (Small-Diaphragm): 16mm
Capsule Diaphragm Thickness (Small-Diaphragm): 4µm
Electronics Type: Solid-state, transformer-balanced output
Output Impedance: 200 Ohm
Max SPL: 136dBA (0.5% THD @ 1000Hz)
Frequency Response: 20Hz-20kHz
Equivalent Noise Level: <15dBA
Output Connector: Male XLR 3-pin, gold-plated
Finish: Polished nickel trim / High-gloss Pinot Noir

Vanguard V4 FET

Custom-voiced, edge-terminated 34mm dual-capsule assembly with 3µm gold-sputtered Mylar diaphragms
3 selectable polar patterns: Cardioid, Figure-8, Omnidirectional
-10dB/100Hz Rolloff
Electronically-balanced solid-state circuitry loaded with premium-grade components
Ultra-low-noise JFET design
Deep-cycle cryogenic treatment of critical signal & power path components
Heavy-duty brass, aluminum, steel, and zinc construction
Open-weave headbasket for low internal reflections and “open-air” voicing
Each V4 comes with its own laser-engraved serial number
Over-spec componentry
Deep-gloss Pinot Noir finish
Polished nickel trim
Precision-cast Vanguard badge
Final Assembly & 100% Quality Control in California, USA
5-Year Warranty

Transducer Type: Condenser
Capsule Size: 34mm (dual-capsule)
Diaphragm Size: 26.4mm
Capsule Diaphragms Thickness: 3µm
Electronics Type: Solid-state, electronically-balanced output
Output Impedance: 200 Ohm
Max SPL: appx. 135dB (145dB w/ Pad)
Frequency Response: 20Hz-20000Hz
Equivalent Noise Level: <=14dBA (A-weighted)
Output Connector: Male XLR 3-pin, gold-plated
High-Pass/Rolloff Switch: 120Hz (either/or with pad)
Attenuation/Pad Switch: -10dB (either/or with rolloff)
Finish: Polished nickel trim / High-gloss Pinot Noir
Weight (microphone): 0.38 kg
Weight (in case): 2.56 kg
Dimensions (microphone): 184mm long, 46mm diameter
Dimensions (case): 305mmL x 280mmW x 146mmH

Vanguard V44S

Heavy-duty brass, aluminum, steel, and zinc construction
Robust punched-steel capsule rotation mechanism
Open-weave headbasket for low internal reflections and “open-air” voicing
Each V44S comes with its own laser-engraved serial number
Over-spec componentry
Deep-gloss Pinot Noir finish
Polished nickel trim
Precision-cast Vanguard badge
Final Assembly & 100% Quality Control in California, USA
5-Year Warranty

Twin custom-voiced, edge-terminated 34mm dual-capsule assembly with 3µm gold-sputtered Mylar diaphragms
3 independently selectable polar patterns per capsule
Electronically-balanced solid-state circuitry loaded with premium-grade components
Ultra-low-noise JFET design
Deep-cycle cryogenic treatment of critical signal & power path components
90º rotatable top capsule with 15º detents
Versatile splitter box for mobile & live recording conditions

Transducer Type: Condenser
Capsule Size: 1.34″/ 34mm (dual-capsule)
Diaphragm Size: 1.04″ / 26.4mm
Capsule Diaphragms Thickness: 3µm
Electronics Type: Solid-state, electronically-balanced output
Output Impedance: 200 Ohm
Max SPL: appx. 135dB
Frequency Response: 20Hz-20000Hz
Equivalent Noise Level: <=14dBA (A-weighted)
S/N Ratio: >=80dB (Ref. 1Pa A-weighted)
Output Connector: Male XLR 5-pin, gold-plated
Finish: Polished nickel trim / High-gloss Pinot Noir
Weight (microphone): 0.50kg
Weight (in case): 4.28kg
Dimensions (microphone):239mm long, 46.25mm max diameter
Dimensions (case): 430mmL x 320mmW x 153mm
Voltage Requirement: Phantom Power (+48V ideal)

Vanguard V13

Heavy-duty brass, aluminum, steel, and zinc metal construction
Rear venting to prolong tube and component life
Open-weave headbasket for low internal reflections and “open-air” voicing
Each V13 comes with its own laser-engraved serial number
Over-spec componentry
Deep-gloss Pinot Noir finish
Polished nickel trim
Precision-cast Vanguard badge
100% Quality Control
5-Year Warranty / 90-day warranty for vacuum tube

Transducer Type: Condenser
Capsule Size: 1.34″ / 34mm (dual-capsule)
Diaphragm Size: 1.04″/ 26.4mm
Capsule Diaphragms Thickness: 3µm
Electronics Type: Valve/Tube, Transformer-Coupled Output
Output Impedance: 200O
Max SPL: 134dB (144dB with pad)
Frequency Response: 20Hz-20000Hz
Equivalent Noise Level: 13dB (A-weighted)
S/N Ratio: 82dB (Ref. 1Pa A-weighted)
Sensitivity: -35dBV
Output Connector: Male XLR 7-pin gold-plated
High-Pass/Rolloff Switch: 125Hz (6dB/octave)
Attenuation/Pad Switch: -10dB
Finish: Polished nickel trim / High-gloss Pinot Noir
Weight (microphone): 0.48kg
Weight (in case): 5.29kg
Dimensions (microphone): 208mm long, 50.5mm diameter
Dimensions (case): 25mmL x 325mmW x 142mmH